Big Savings With Dryer Vent Cleaning

Nothing compares to the comforting embrace of a blanket that’s fresh out of the dryer. The dryer sheets provide the perfect smell that engulfs your senses as you wrap yourself in the warmth of the most comfortable blanket on earth.

Happiness is found in the little things of life. The warmth of a blanket, the beauty of a sunrise, and the calming of leaves blowing.

Do interruptions plague your utopia? Does your dryer take twice as long to dry clothes? Are your blankets losing their warm and fuzziness with each load? Something’s wrong!

When a Dryer Vent is Clogged

You may remove the lint from the tray dryer repair pasadena, but there’s more to dryer maintenance than just that. Although you should clean out the lint tray before or after every load, that actually only takes care of one of the problems causing your dryer’s decreased insufficiency. The other problem lies in the effects of a clogged dryer vent.

Over time, lint builds up in the vent, and behind and around the dryer. But cleaning out the vent isn’t the easiest task. In fact, contacting a professional is the most ideal option. An expert will inspect your dryer and properly clean out all debris that is causing the blockage.

The effects of a clogged dryer vent actually surpass being just a clogged vent, but can waste energy and money and cause fires!

Wasting Energy & Money

A clogged dryer vent can waste energy because your dryer has to work much harder to complete tasks it could do much more easily without the buildup. Just like we feel as though everything is far more difficult and time-consuming when we’re sick, our dryer feels the same way when its vent is clogged.

The dryer will actually require more energy to dry your clothes or blankets. Thus what would have used a certain amount of energy has now significantly increased, which also enlarges your monthly energy bill by about $18-24.

Can you imagine wasting nearly $250 a year all because of a clogged dryer vent? Oh, and your dryer won’t last as long if it’s constantly working harder than it should! You don’t have to waste money, just stay alert to how your dryer is functioning.

Signs of a Clogged Dryer Vent

A great way to extend the life of your dryer and prevent all the residual effects of a clogged dryer vent is to maintain the condition of your dryer. Watch out for these signs of a clogged dryer vent:

• Clothes are left Hot and wet after the load has finished
• Dryer is overly hot
• Clothes take much longer to dry
• The lint tray hasn’t trapped any lint

Fire Hazards

According to the U.S. Consumer Product Safety Commission in 1998, dryers were linked to about 15,600 fires and 20 residual deaths and 370 injuries. Cleaning dryer vents is serious business because when they’re not clean people get hurt and homes get damaged.

Some people may think that these fires happen at Laundromats or schools where there are lots of dryers in the same place, but 80 percent of these fires actually occur in residential areas.

Money isn’t only wasted because of the increase is energy usage, but also because of the fire damages. It’s estimated that $88 million is lost to property damages caused by dryer vent related fires.

Clean Dishwasher? Maybe, Maybe Not!

As strange as it sounds, your dishwasher can get very dirty. As it washes the dishes the food waste and residue is washed off and into the sump and pipe work, not all of it dissolves and washes away down your drain. Over time this waste build up and can make your machine and kitchen smell.

So, how do you clean it?

You can freshen it and have a sparkling clean dishwasher with vinegar! Yes really, good old fashioned white distilled vinegar – try it, it works! Just take half a cup of white distilled vinegar and pour into an empty dishwasher and run the rinse cycle. This will clean any build up that may have formed in the dishwasher and its pipe work. It will also deodorizes the machine, leaving it smelling fresh kitchenaid dishwasher repair los angeles .

The best way to avoid these odors is to make sure that you rinse the dishes thoroughly so you don’t get a build up of food to start with, but with our busy lifestyles this just does not happen.

Vinegar is a great way to clean your dishwasher, if you have never tried it, give it a go, you will be pleasantly surprised, but white distilled vinegar can be used to clean many more household items – how about these tips to use in your kitchen:

Get rid of mineral deposits on taps by soaking a cloth or paper towel in white distilled vinegar and wrapping the area tightly. Let this sit for a couple of hours or overnight.

Renew sponges and dish cloths by placing them in just enough water to cover them. Then add 1/4 cup white distilled vinegar. Let them soak overnight.

It’s not just for your chips!!

Common Refrigerator Faults That Warrant Repair

The refrigerator is perhaps one of the most important appliances in the kitchen because not only does it store food, but it also keeps it from spoiling. Without it, you would have to do your grocery shopping everyday which would be a big inconvenience.

Unfortunately, this scenario is very possible if your refrigerator breaks down and if that is the case, you need to contact a repair technician right away. Not every problem or fault needs to be attended to by a technician because there are things that you can easily troubleshoot on your own. For instance, when it is not cooling the food as it is supposed to, you can just check if there is any dirt or particles that are blocking the air flow ducts whirlpool refrigerator repair los angeles.

There are some common refrigerator problems that do warrant repair. A refrigerator should have a gentle humming sound that assures you that all is well and hearty but if it creaks, groans or croaks, or when the noise is a nuisance, then it means there is a problem. You should immediately get in touch with a technician to determine what is wrong and have it rectified.

It is a common problem to find a leaking refrigerator and this can even flood your kitchen floor. The water comes from different sources inside the refrigerator. All of them have an ice or water dispenser, but there could be specific lines in them that are broken and will need replacement. If there is a drain pan or defrost tray underneath, then you should check for cracks and holes. When the refrigerator does not cool as it is supposed to, then this is a clear indication that something is wrong.

You should ensure that the temperature is set between 38 to 40 degrees Fahrenheit and adjust the thermostat controller appropriately. After 6 hours, the temperature should change but if that is not the case, then you should check if the fan is running. If all fails, you should try to defrost the refrigerator by turning it off and leaving the doors open all night long.

In the morning, you should replace the food and turn it on, check that the thermostat is set in the middle setting and after 6 hours, check the temperature. If this fails, then it is time to call a repair service provider to have a look and identify what the problem is. When the light is on but the unit is not running, then this means that the compressor is faulty and will need to be replaced.

However, before the replacement, you should consult with a professional so that other causes like a faulty starter relay and temperature control unit can be ruled out. The compressor is an integral component of the refrigerator and most of the faults may originate from it. You should never tinker with the motor of the compressor even when the unit is off because you may end up causing more problems. Having a professional to check any faults in a refrigerator ensures that the right cause of action is taken, and the problem is successfully rectified.

Indoor Clothes – Dryers and Airers

Drying your clothes outdoors is great in summer, but for delicate clothes and on those days when the rain won’t let up, an indoor clothes dryer becomes a necessity. Depending on your needs and the amount of washing that you need to do, you will find that there are numerous designs and models to choose from.

How do you choose the right indoor clothes airer for you?

1. First you’ll want to access how much space you have and how much washing needs to be dried. For smaller families the fold away or wall mounted single or double line may be the ideal solution. The fold away designs are the most commonly used and when researching you should ensure that they are either made with plastic or chrome plating on the bars to ensure that they don’t corrode and damage your clothing lg dryer repair pasadena.

2. For larger families, you may want to consider placing a five line retractable wall mounted design in your basement or garage. It is always important to consider how much air circulation the indoor drying area is going to get and if it is possible to keep windows open or set up a small fan to keep the air circulating.

3. For the elderly or infirm who still need to have their washing hung up, the low level mobile models are best. They have wheels on for easy mobility and can be reached on all levels even from a seating position.

If your only need is to hang a few shirts or items that will dry well on a coat hanger, then you could easily use a clothes rack for that purpose. They stack away quickly and easily and are extremely affordable.

Used Appliance Parts

With the growing environmental concerns facing the world today, it only makes sense to use and reuse appliance parts that are still working properly. Why contribute to waste when you can help lessen it? Knowing how to buy and dispose of used appliance parts can not only save and make you money, but also help you contribute to environmental preservation.

Buying used appliance parts. Second-hand appliance parts are widely available over the Internet or in your local electrical shops, and they’re usually sold at half the price of brand new parts. Ask your technician if you can cut costs by buying used parts. Remember that it is better to invest in brand new parts in some cases, so seek professional advice.

If you have some knowledge of appliance repair samsung appliance repair pasadena, you can probably purchase and install these used parts yourself to save even more money. Beware of low-quality used appliance parts, though, because you may have to replace them after only a short period of time, causing you to spend more than you would have if you just bought brand new parts. Buy used appliance parts only from trusted dealers. They will disclose information on what the condition of the used part really is and advise you accordingly.

Selling used appliance parts. Instead of throwing away your used appliances, why not make some money out of them? Take them apart and sell components that are still working either directly to individual buyers or to local shops that specialize in second-hand appliance parts.

To sell directly to individual buyers, try looking at wanted ads in forums and other buy-and-sell sites; you are likely to find someone who needs an appliance part you happen to have. You can also post ads of your merchandise yourself and wait for interested buyers to contact you.

To sell your used appliance parts to a local shop, simply bring them in for an appraisal. Expect the shop to buy it from you at a low price – after all, they need to resell the parts at a profit. This option is best if you do not have time to sell your used appliance parts individually. The shop will likely buy in bulk and pay you upfront.

Process of Refrigerator Repair – Some General Tips

Refrigerator is a common appliance in everyone’s home which runs day and night and keeps your stuff fresh and cold. They work very hard but it is difficult to understand how they actually perform such tasks since they involve heavy machinery. In fact this is the main reason why refrigerator repair need arises. It is on rare occasions that your lovely refrigerator encounters problems and stops working. But don’t fear! Refrigerator repair is quite easy and can be performed by anyone provided you follow some simple steps while doing so. Basic repair can easily be carried out by anyone with minimum skills, proper tools and knowledge samsung refrigerator repair pasadena.

Refrigerator repair can be done by you through the help of internet as there are many useful resources, guides, user manuals and even do it yourself stuff. This article will help you know how to do repairing at home. First of all identify the problem with your refrigerator and then try to find the root cause. Now before performing any function on it unplug the switch and discharge the capacitor. Basic problem of every refrigerator is similar and can be examined through simple process. Like noisy refrigeration or nonstop running can all be handled by you by checking door seals and dirty condensers.

Refrigerator repair can be minimized through routine examination of your appliance and maintaining cleanliness inside and outside it. Timer and temperature controls result in malfunction and therefore should be controlled periodically to ensure that they function properly. Maintain a schedule to clean condenser coils and verify that all sources of power are functioning properly. Misconception regarding refrigerator repair arises when Freon causes problem. In such cases it is the expert technician who can identify and rectify the problem. It is considered best to get it replaced rather than repairing it.

Refrigerator repair is all about safety and thus includes a few precautionary measures like plugging of the switch before troubleshooting it. Keep pets and children away while dissembling the components of refrigerator. However, there are exceptions which are best to be left on professionals or technicians instead of trying at your own.

 

Avoid Costly Refrigerator Repairs With Do-It-Yourself Maintenance and Cleaning

Of all the modern-day appliances you rely on in your home, the refrigerator is probably the hardest working. Unlike, say, the dishwasher or washing machine, the refrigerator doesn’t just get turned on once in a while and put through a cycle or two. It operates 24 hours a day, 7 days a week, to protect and preserve your food. So, considering the cost of groceries these days, now is the time to protect your fridge with some easy maintenance and cleaning tips for keeping this household workhorse running smoothly kenmore refrigerator repair altadena.

First, it’s not enough to wipe up spills and clean out old food to prevent any lingering odors or mold from developing. At least once a year, you need to give your refrigerator a thorough inspection and cleaning, inside and out, to remove any accumulated dust and dirt buildup, take note of any scratches or defects, and check the electrical connections. It’s particularly important to eliminate dust from the condenser coils either behind or underneath your refrigerator, depending on the model you own. This simple act of cleaning your refrigerator’s condenser coils with a vacuum or brush can go a long way in avoiding costly refrigerator repair and extending the life and efficiency of this hard-working appliance.

Next, check the refrigerator and freezer doors to make sure the gaskets are clean and well sealed. Even the smallest crack or gap in the gasket could allow warm air in and prevent your refrigerator from maintaining the proper temperature of 35 to 42 degrees. In addition, doors that do not seal tightly could indicate a refrigerator that is out of balance. In that case, use a leveling tool to correct your refrigerator’s alignment and make any necessary adjustments to your flooring or to the feet on the bottom of the appliance.

As you examine the interior and exterior of your refrigerator and freezer, make sure to check all knobs such as the thermostat controls and listen for any unusual noises. Uncommon noises coming from your refrigerator are often the first sign of a malfunctioning part, from the evaporator fan motor to the condenser fan to the compressor. Depending on the source of the noise, some of these issues can be as easy to fix as tapping a rattling drip pan. Problems with compressors, water inlet valves, and other more complicated parts, however, are best left to a professional refrigerator repair service.

Caring for the hardest working appliance in your house can be easy when you follow these simple guidelines for refrigerator maintenance and cleaning. So whatever type of refrigerator you own, from a traditional freezer on top to a spacious side-by-side to a newer freezer on the bottom model, take time out for a thorough inspection and review your refrigerator instruction manual for further information from the manufacturer. Not only will it help you safeguard those expensive groceries, it could very well help you avoid costly refrigerator appliance repair and even lengthen the life of your fridge.

How to Replace the Lid Switch on a Whirlpool Washer

So, you have returned to the laundry room with a washer sitting idle and full of wet clothing. One of the most common causes of a direct drive washer that does not spin is a faulty lid switch. This is a common repair for Whirlpool, Kitchen-aid, Kenmore and Roper top-load washers. Follow these steps and your washer will be back to draining in no time.

To verify if the lid switch is broken, gently lower the lid and you should hear a click when the lid actuator contacts the lid switch. Also, a multi-meter can be used to test a lid switch but you will need to gain access to the interior of the washer.

First, unplug the washer before you begin any repair maytag washer repair pasadena. Next, you will have to remove the console but there are several ways to do this depending on your model washer. The most common way is to remove the end caps from each side of the console. This is done by firmly pulling forward at the top of the end cap until it snaps free. You will then see one screw on each side of the console that will need to be removed. With screws removed, pull forward and flip up the whole console gently and let it rest backwards. Next, unplug the lid switch connector harness.

Now you can use your multi-meter to check the lid switch for continuity with the lid resting in the closed position. If the switch is faulty, the cabinet can be removed to gain access to it for replacement.

With the console up and using a screwdriver, the spring clips on each side of the top cabinet can be removed. Gently pop the clips out and set them aside. Next, reach in with one hand grabbing the cabinet while the other holds the lid open and pull the cabinet forward.

Lift the cabinet’s lid and you will see that the lid switch is held in place with two screws. Remove these screws with a Phillips-head screwdriver and also remove the ground screw attached to the cabinet. Push the gray tube holding the wires out of the clip that holds it and release the plug from the slot in the top of the cabinet.

Reinstall the new lid switch by securing it to the washer with the two retaining screws. Place the wire assembly back underneath the inside edge of the cabinet and insert the new switch connector into the slot in the top of the cabinet.

The cabinet can be reinstalled by guiding the front lower part of the cabinet under the washer support frame first, and then letting the cabinet set backwards. There are locking tabs on the washer’s bottom frame that the cabinet will fall into. It may take several tries to position the cabinet correctly so be patient. After the cabinet is back in position, reattach the top cabinet clips by pushing them firmly into the cabinet slots. Finally, the wiring harness for the lid switch can be reattached and the console secured with the two retaining screws.

Typical Washing Machine Repairs and What to Expect From a Professional

Your washing machine is an essential piece of equipment in the home. If it becomes worn down or broken, the entire process of laundry will grind to a halt. That’s when you need the services of a professional repair engineer to look after the repairs quickly and efficiently.

One of these typical washer repairs is bound to happen sooner or later. The age of the machine and the original construction are both factors that determine which problem (or problems) arise ge washer repair pasadena
.

When Your Washing Machine Won’t Spin
This problem could be the result of a few different and unrelated problems. A washing machine will not spin if the drum is still filled with water. That is normally caused by a blockage in the drainage pipe, either from a lost piece of laundry or a build up of soap and other debris.

Alternatively, a washer will not spin if the drum is off balance or is faulty in some ways. Washing machine repairs involving the drum include replacing the belts, repairing the motor, brushes, timer or speed control module.

When Your Machine Won’t Stop Banging
Often banging from a washer is a result of an unbalanced load. Blankets, heavy clothing and pillows can cause this problem. Also, a machine can become off balance when the bearings break, there is a suspension problem inside the washing machine or the motor needs to adjusted, calibrated or replaced.

If shifting the load of clothing in your machine doesn’t stop the banging, or when banging is continuous, call in a professional to diagnose the problem and complete the washing machine repairs.

When you’re Machine Stops Mid-Cycle
This can be the fault of a broken timer or possibly a result of a faulty valve or water heater element. Also, if the machine will not drain due to a blockage the cycle will not continue.

When Your Machine Door Won’t Open
Washing machine repairs involving the door are common. If your model contains a heat sensor that keeps the door locked, that element may need to be replaced. Alternatively, the door itself may be jammed, warped or broken or a cable inside has been snapped.

A qualified professional is the one to trust with your washer repairs. No matter what the problem is, an appliance repair engineer will know how to diagnose and repair the issue fast, getting your machine up and running as good as new.

Auto Air Conditioning Repair

When your car or truck A/C is not blowing “cold air”, the first thought is to panic. $$$$ signs are going through your mind. Your A/C is broken and the repair is going to be expensive. This article takes the mystery out of automotive air conditioning and serves as a primer so that you can make common repairs yourself and save MONEY on professional repairs.

A/C Principles

There are books and publications that contain volumes of information on the subject of air conditioning repair. This information is often too technical for the you to learn how-to fix your auto air conditioning system lg dryer repair pasadena.

In the nutshell, here is all that you need to know about the fundamentals of refrigeration so that you can fix your auto air conditioning system yourself.

Air conditioning is the process in which air inside the passenger compartment is cooled, dried, and circulated. Heat is removed from inside the vehicle and transferred to the outside air.

All air conditioners whether, it is an auto A/C, household refrigerator or home HVAC, work on the same principles. Namely, a liquid refrigerant is changed to a gas and then back to a liquid. If a change-of-state of the refrigerant is to take place, heat transfer must take place. The two (2) rules that apply to refrigerant are:

1. Refrigerant in a gaseous state collects, absorbs, and holds heat.
2. Refrigerant in a liquid state releases that heat.

A/C Operation and Components

For your auto A/C to blow “cold air”, R-134A refrigerant must pass through and change state in three (3) components, one (1) receiver-dryer, and one (1) expansion valve that makes up the closed auto air conditioning system. The components of the system are:

1. Compressor – A device that pressurizes the heated refrigerant..

2. Condenser – A radiator for refrigerant that transfers the heat that was absorbed in the passenger compartment to the cooler air.

3. Evaporator – Is a small radiator located under dash in the passenger compartment. Liquid refrigerant entering the evaporator creates a pressure loss. The liquid refrigerant absorbs heat from the air blowing across the evaporator. It then boils and changes state to vapor before it enters the suction port of the compressor.

4. Receiver-Dryer – Is a canister that stores the liquid refrigerant when the compressor is not running. It contains a desiccant that removes moisture from the system.

5. Expansion Valve – Is a metering device that controls the amount of refrigerant to the evaporator.

A/C Quick Check

A check that can easily be made to check the health of the A/C system is the “feel check”. With engine running, turn the auto A/C control to “ON” and the blower on “high”. Take a test drive to warm the engine until the A/C system pressures stabilize. Raise the hood. With the A/C “On”, locate the large tubing connected and routed from the compressor (low side) to the expansion valve (inlet side) of the evaporator. Next, locate the small tubing that is connected to the discharge-side of the compressor and routed to the outlet side of the evaporator. When you feel these two (2) lines, you should observe these results:

1. The low-side line should feel “cool” to the touch.
2. The high-side line should feel “warm” to the touch.

If the high-side tubing is not warm and the low-side is not cool, further tests will have to be made as the system is not doing any work. There is an internal problem; such as, a defective component or a leak in your A/C system.

Testing A/C System

Before system temperature tests can be made, a checklist should be followed (below) to setup for testing the A/C system:

1. Set the A/C “ON-OFF” switch to “ON”.
2. Set the temperature control to “maximum cooling”.
3. Set the blower on “high” or the highest number on the control switch.
4. Temperature inside passenger compartment should be stable and getting cooler.
5. Engine speed must be a minimum of 1500 rpm’s.
6. All windows should be be in the “UP” position.

Check Temperature

Your compact car or truck has a small capacity A/C system and a loss of “cooling” would be more noticeable than a larger capacity auto A/C system. If a noticeable loss of “cooling” capacity is noticed, a temperature check at the vent registers should be made. This check can be made with an instant read or digital temperature thermometer.. The discharge air from the vents in the passenger compartment should range from 38 to 42 degrees F.

A/C System Diagnosis

Assuming that the discharge air test measured at the vent registers is out-of-range, a system pressure test will have to be made. Professional A/C technicians connect a tool known as the manifold gauge set to the “low” and “high” side service valves of the system. For you to diagnose and look inside the A/C, it will be necessary to become proficient in the use of the manifold gauge set.

A manifold gauge set that is suitable for the needs can be purchased at most auto supply stores and Internet A/C tool and supply store fronts for less than $50.00. TIP: Look for a gauge set that has a built-in sight glass.

Locate the “low” and “high” side service valves.. Connect the hoses (they are a snap connector fit) to the service valves in the following manner:.

1. Connect the blue hose of the gauge set to the “low-side” service valve of the compressor.
2. Connect the red hose of the gauge set to the “high-side service valve of the compressor.
3. The yellow hose of the gauge set is connected to a vacuum pump or a refrigerant can to add refrigerant to the system. The yellow hose is not connected to the system at this time.

Static Test

If you find an out-of-range temperature reading, the manifold gauge set should be installed on the “low” and “high-side” service valves. With the engine “OFF” and the compressor and clutch not engaged, the blue “low-side” and red “high-side” gauges should show equal readings of approximately 80 to 120psi. These readings would indicate that there is a refrigerant charge in your A/C system. If the readings were 50psi on each gauge, this would indicate that there is refrigerant in the system but a LOW CHARGE. If the readings were 10 to 20psi on each gauge would indicate that there is little or no refrigerant in your A/C system.